OUR PRODUCTS AND SERVICES INCLUDE:

• EPA Registered and Certified Technicians
• Strict EPA refrigerant Guidelines Followed
• Expert Troubleshooting and Diagnosis
• Freon Leak Detection
• Energy Saving Central Cooling Systems Installed and Repaired
• Service and replacement for all cooling and heating systems
• Preventive maintenance
• A variety of systems and equipment to fit your budget
• Attractive financing alternatives
• The most up-to-date products and services available

 Billing for the job, not by the hour

 PREVENTIVE MAINTENANCE

With preventive maintenance you will avoid small problems turning into big problems and ensure optimal performance of your comfort system.  

• Provide longer lasting equipment
• Reduce utility bills
• Reduce repairs
• Provide a more comfortable indoor environment
• Protect your investment

Two Tune-Ups Per Year - Having your system checked regularly enables us to keep your unit running as efficiently as possible, which saves you money on your utility bill month every month. These regular check-ups also enable us to catch problems such as loose or burnt wires and freon leaks, before they lead to a larger problem such as motor failure.

Energy Saving Coil Cleaning - Dirty coils reduce efficiency and cause your unit to work harder, causing parts to wear out faster, and shorten the life expectancy of your unit. Your unit will cost you more month after month on your utility bill if the coils are not kept clean. Test performed by the EPA explain that as little as 1/10th of a centimeter of dirt or dust on a coil could reduce efficiency by 21%. Since the average homeowner's heating and cooling bill is $1,500 per year, a 21% loss in efficiency means you could be wasting up to $315 each year.

Labor Warranty -  All of our labor services are warranted for 30 days. If you have a problem within 30 days of service, there will be no charge to come back out and diagnose the problem. We stand behind our work.

FURNACE TUNE UP

• Test for carbon monoxide leaks
• Clean burner assembly
• Clean ignition assembly
• Clean blower motor
• Inspect filtration system
• Adjust blower components
• Lubricate moving parts as required
• Test and adjust safety controls
• Tighten electrical connections
• Calibrate thermostat
• Check flue draft
• Check combustion
• Inspect vent piping
• Inspect humidification system

AIR CONDITIONER TUNE-UP

• Clean condenser coil
• Inspect evaporator coil if accessible
• Clean condensate drain
• Clean blower motor
• Inspect filtration system
• Adjust blower components
• Lubricate moving parts as required
• Inspect for refrigerant leaks
• Test condensate pump
• Tighten electrical connections
• Test starting capabilities
• Measure air temperature differential
• Monitor refrigerant pressure
• Measure amperage and voltage

FAN COIL TUNE-UP

• Inspector evaporator coil
• Clean blower motor
• Inspect filtration system
• Adjust blower components
• Lubricate moving parts as required
• Test and adjust safety controls
• Tighten electrical connections
• Calibrate thermostat
• Inspect humidification system
• Inspect electrical heating elements

HEAT PUMP TUNE-UP

• Clean condenser coil
• Clean condensate drain
• Check defrost controls
• Inspect auxiliary heaters
• Inspect filtration system
• Lubricate moving parts as required
• Inspect for refrigerant leaks
• Test condensate pump
• Tighten electrical connections
• Test starting capabilities
• Measure air temperature differential
• Monitor refrigerant pressure
• Measure amperage and voltage